张彦振

张彦振

教授 硕士生导师 博士生导师

国家级高层次青年人才、洪堡学者、山东省泰山学者青年专家

机电工程系主任

邮箱：zhangyanzhen@upc.edu.cn       电话：0532-86983303       办公地点：工科楼E307

教育经历

2003.9-2007.7

齐鲁工业大学机械设计制作及其自动化专业，学士学位

2007.9-2014.6

中国石油大学（华东）机械电子工程专业，工学博士学位

工作经历

2015.2-2018.10

德国奥尔登堡大学，洪堡学者、助理研究员

2018.10-2019.10

澳大利亚斯文本科技大学，DECRA研究员、博士生导师

2020.5-至今

中国石油大学（华东），光华学者特聘教授

研究领域/招生方向

研究领域：本课题组主要从事先进制造技术及理论研究，包括熔滴喷射式金属增材制造技术及理论、精密高效喷墨打印技术及理论、印刷电子技术、生物3D打印技术、微流体动力学、微流控技术及理论等。

招生方向：

博士：机械电子工程、机械制造及其自动化

硕士：机械工程

主讲课程

微控制器原理与接口技术，工程概论，现代机械科学与技术

主持的科研项目

[1] 中国国家自然科学基金面上项目，202401~202712

[2] 中国国家自然科学基金面上项目，202001~202412

[3] 澳大利亚研究理事会DECRA基金项目，201810-201910

[4] 德国科学基金（DFG）项目, 201706-201810

[5] 德国洪堡基金项目,  201502-201701

[6] 山东省“泰山学者”青年专家人才计划项目， 202001-202412

[7] 山东省优秀青年基金项目（海外），202204~202503

[8] 中国石油大学（华东）自主创新项目, 202005~202505

学术论文

共发表SCI收录论文70余篇，其中以第一作者或通讯作者在Nature Communications、Physical Review X、Journal of Fluids Mechanics等国际著名刊物上发表论文30篇，被国内外学者他引1000余次；出版英文专著3部。代表论文如下：

[1]. Y Shen, Y Liu, Y Zhang, H Dong, W Sun, X Wang, C Zheng, R Ji. High-speed dry electrical discharge machining. International Journal of Machine Tools and Manufacture 2015, 93, 19-25

[2]. Zihao Li (李子豪), Teng Xiang (相腾), Xiangyu Yin (殷祥雨), Yudong Gao (郜玉东), Jide Wang (王继德), Guofang Hu (胡国放), Weiwei He (贺炜威), Yuyao Wu (吴玉尧), Boce Xue (薛博策), Runsheng Li (李润声), Dege Li (李德格), Yanzhen Zhang (张彦振), Ioan Marginean. Meniscus dynamics and jetting transitions in pulsatile flow electrosprays.Physics of Fluids 37, 102006 (2025)

[3]. Weiwei He, Fangxin Wan, Yunlong Liu, Guanyang Wu, Puye Zhang, Yingshuo Xiong, Xinyue Zhang, Tianyi Hang, Wei Chen, Kejie Chen2, Boce Xue, Runsheng Li, Guofang Hu, Zihao Li, Yuyao Wu, Jianhao Zhu, Teng Xiang, Jiajia Zheng, Yanzheng Zhang；Deep learning-powered composite foam smart glove with cross-dimensional conductive networks for sign language recognition. Composites Part B: Engineering，Volume 308, 1 January 2026, 112985

[4]. Yue Zhao, Yanzhen Zhang，Spontaneous Spreading and Wetting of Liquid Metal Droplets on Copper Plates in Alkaline Solution;Colloids and Surfaces A: Physicochemical and Engineering Aspects，Volume 727, Part 2, 20 December 2025, 138250

[5]. Teng Xiang (相腾) ;Zihao Li (李子豪);Yudong Gao (郜玉东);Xiangyu Yin (殷祥雨);YunLong Liu (刘云龙);Boce Xue (薛博策) ;Dege Li (李德格)  ;Guofang Hu (胡国放);Weiwei He (贺炜威);Yuyao Wu (吴玉尧);Runsheng Li (李润声);Yanzhen Zhang (张彦振). On-demand electrohydrodynamic inkjet printing utilizing water hammer effect and direct current electric fields. Physics of Fluids 37, 082036 (2025)

[6]. Zihao Li, Teng Xiang, Xiangyu Yin, Jide Wang, Dege Li, Guofang Hu, Weiwei He, Yuyao Wu, Boce Xue, Runsheng Li, and Yanzhen Zhang Contact Printing Based on Meniscus Vibration，Langmuir 2025 41 (9), 5901-5912

[7]. Boce Xue, Yanzhen Zhang *, Yuyao Wu, Guofang Hu, Zihao Li, Weiwei He, Mingyu Yan, Runsheng Li, Xiao-Yu Tang *. Intelligent monitoring and control system for molten metal drop-on-demand jetting by water-hammer effect[J]. Precision Engineering, 2025, 96: 134-146.

[8]. Puye Zhang, Weiwei He, Guanyang Wu, Yunlong Liu, Xinyue Zhang, Wei Chen, Boce Xue, Runsheng Li, Guofang Hu, Zihao Li, Yuyao Wu, Jianhao Zhu, Teng Xiang, Yanzheng Zhang,Hierarchically structured dual-mode sensor with directional moisture-wicking capability for weak physiological signal monitoring and long-range motion tracking, Chemical Engineering Journal, Volume 520,2025,165585, ISSN 1385-8947.

[9]. Runsheng Li, Hui Ma,Xingwang Bai, Boce Xue , Changze Li, Kui Zeng, Youheng Fu,Yonghui Liu*,and Yanzhen Zhang*.  Explainable prediction of bead geometry in laser-arc hybrid additive manufacturing of AlCualloy using a particle swarm optimization based ensemble model, Materials science in additive.

[10].Yanqing Zhang ;Guofang Hu;Boce Xue (薛博策)  ;Zihao Li (李子豪);Yuyao Wu (吴玉尧);Weiwei He (贺炜威);Mingyu Yan (闫明宇) Runsheng Li (李润声);Yanzhen Zhang (张彦振) High-frequency jetting through axial forced vibration of jet tubePhysics of Fluids 37, 011709 (2025)

[11].Zihao Li , Yanzhen Zhang, Dege Li , Jide Wang,Teng Xiang, Weiwei He ,Guofang Hu,Yuyao Wu,Boce Xue  and Runsheng Li. High frequency electrohydrodynamic jet printing based-on meniscus vibration. Phys. Fluids 36, 000000 (2024)

[12].ZihaoLi,WeiweiHe,YanzhenZhanga⁎,JideWang,GuofangHu,YuyaoWu,DegeLi, Ultrahigh-frequency electrohydrodynamic jetting with adjustable modes for rapid printing of high-resolution patterns. Journal of Manufacturing Processes. Accepted

[13].Boce Xue, Yanzhen Zhang, Guofang Hu, Yuyao Wu, Zihao Li, Weiwei He, Mingyu Yan, and Runsheng Li. Mechanism of liquid jetting by driving jet tube for reciprocating motion. Physics of Fluids 36, 122124 (2024)

[14].Boce Xue; Yanzhen Zhang* ; Guofang Hu; Yuyao Wu; Zihao Li; Weiwei He; Runsheng Li.On-demand jetting of high-viscosity liquid by jet tube impact. Physics of Fluids 36, 083321 (2024).

[15].Boce Xue* , Dong Du* , Guodong Peng, Yanzhen Zhang, Runsheng Li, Zixiang Li. Visual monitoring of weld penetration in aluminum alloy GTAW based on deep transfer learning enhanced by task-specific pre-training and semi-supervised learning. Journal of Manufacturing Processes 133 (2025) 1038–1050.

[16].Yanzhen Zhang*, Jianhao Zhu, Mingyu Yan, Fenglin Hao, Guofang Hu, Zihao Li, Weiwei He, Yuyao Wu, Boce Xue, Runsheng Li, Shaoguang Teng，Printing of liquid metal by laser-induced thermal bubble at the solid–liquid interface. Optics & Laser Technology, Volume 177, October 2024, 111228

[17].Weiwei He , Yanzhen Zhang*, Puye Zhang, Jiajia Zheng, Boce Xue, Guofang Hu, Zihao Li, Yuyao Wu, Renyun Zhang*. Deep learning-assisted flexible piezoresistive sensor with liquid-phase reduced metal electrodes for fitness movement recognition and correction. Chemical Engineering Journal,Volume 495, 1 September 2024, 153362.

[18].Yanzhen Zhang*, Yue Zhao, Fenglin Hao, Mingyu Yan, Xiaodi Zhao, Boce Xue, Runsheng Li, Printing of liquid metal by electrically modulating of interface tension in liquid environment, Physics of Fluids 36(2),2024

[19].Yanzhen Zhang*, Guofang Hu*, Lianlei Zuo, Mengliang Bang, Ning Wang, Dege Li, Zihao Li, Runsheng Li, Weiwei He, Boce Xue, Yanqing Zhang ,Ultrasonic vibration micro-jet ejection for metal additive manufacture, Journal of Materials Research and Technology, 2024, 28: 2149-2162.

[20].Yuyao Wu, Yanzhen Zhang*, Mingyu Yan, Guofang Hu, Zihao Li, Weiwei He, Xiaolong Wang, Aibaibu Abulimit, Runsheng Li ,Research Progress on the Application of Inkjet Printing Technology Combined with Hydrogels, Applied Materials Today,. 2024, 36: 102036

[21].Mingyu Yan, Yanzhen Zhang*, Jianhao Zhu, Haifeng Zang, Zhuochen Ding, Xiaodi Zhao, Runsheng Li, Printing of liquid metal by laser-induced thermal bubble at the liquid-liquid interface, Physics of Fluids

[22].Dege Li*, Li Sun, Zihao Li, Xinlei Wu, Guofang Hu, Chi Ma, Qiang Sun,Yonghong Liu, and Yanzhen Zhang*, Suppression of secondary droplet for high-definition drop-on-demandinkjet by actively regulating the channel acoustic waves. Acta Mech. Sin., Vol. 40, 323340 (2024)https://doi.org/10.1007/s10409-023-23340-x

[23].Yanzhen Zhang*, Mingyu Yan, Jianhao Zhu, Haifeng Zang, Laser-induced high-throughput printing of liquid metal. Journal: ACS Applied Electronic Materials. 10.1021/acsaelm.3c01065

[24].Dege Li (李德格)  Jide Wang (王继德); Guodong Yang (杨国栋); Xinlei Wu (武鑫磊) Zihao Li (李子豪); Guofang Hu (胡国放); Xiaolong Wang (王晓龙);Yonghong Liu (刘永红);Yanzhen Zhang (张彦振) High-throughput piezoelectric droplet dispenser driven by ultra-low voltage[J]. AIP ADVANCES. 2023, 13(3).

[25].Guofang Hu, Ning Wang, Jianhao Zhu, Mengliang Bang, Lianlei Zuo, Zihao Li, Yanzhen Zhang*, Investigation of the thermal behavior during the direct writing metal additive manufacturing, Journal of Materials Processing Technology, Volume 319, 2023, 118060,

[26].Guofang Hu, Bingfang Huang, Hongbao Xie, Lianlei Zuo, Ning Wang, Dege Li, Yonghong Liu, Yanzhen Zhang*, Ultrasonic-assisted direct writing metal additive manufacturing technique, Journal of Materials Processing Technology, Volume 312, 2023, 117830,

[27].Dege Li, Haoren Li, Guodong Yang, Yi Cao, Bingfang Huang, Xinlei Wu, Qiang Sun, Chi Ma, Yu Zhou, Yonghong Liu, Yanzhen Zhang*，Mechanisms of Inkjet printing in liquid environment，Journal of Fluid Mechanics 2022, 948, A40, doi:10.1017/jfm.2022.716

[28].Dege Li ,Yi Cao, Bingfang Huang, Xinlei Wu, Guofang Hu，Xiaolong Wang，Yonghong Liu， and Yanzhen Zhang*，Fragmentation of inviscid liquid and destination  of satellite droplets，Physics of Fluids 34, 084105 (2022); https://doi.org/10.1063/5.0102220

[29].Dege Li, Haoren Li, Guodong Yang, Jide Wang, Bingfang Huang, Xinlei Wu, Qiang Sun, Chi Ma, Yonghong liu, Yanzhen Zhang*, Subharmonic resonance and antiresonance characteristics for high frequency confined interface vibration inkjet printing， Physics of Fluids, 34, 000000 (2022); doi: 10.1063/5.0075820

[30].Dr. Shokoufeh Rastgar, Sebastian Pleis, Prof. Yanzhen Zhang, Prof. Gunther Wittstock，Dispensing Single Drops as Electrochemical Reactors， ChemElectroChem, 9(8), e202200004, 2022; https://doi.org/10.1002/celc.202200004

[31].Yanzhen Zhang; Guofang Hu; Yonghong Liu; Jide Wang; Guodong Yang; Dege Li*， Suppression and Utilization of Satellite Droplets for Inkjet Printing: A Review，Processes 2022, 10(5), 932; https://doi.org/10.3390/pr10050932

[32].Li, D.; Li, J.; Wang, K.; Yang, G.; Cao, Y.; Huang, B.; Wu, X.; Sun, Q.; Ma, C.; Zhao, L.; Liu, P.; Liu, Y.; Zhang, Y., Dry-jet wet spinning and encapsulating for preparing multifunctional fibers based on anti-Rayleigh-Plateau-Instability solution. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2022, 638, 128240, doi:https://doi.org/10.1016/j.colsurfa.2021.128240.

[33].Dege Li, Yi Cao, Bingfang Huang, Molong Han, Xinlei Wu, Qiang Sun, Chao Zheng, Lilong Zhao, Chi Ma, Hui Jin, Xiaolong Wang, Yonghong Liu,* and Yanzhen Zhang* Active Femtoliter Droplet Generation in Microfluidics by Confined Interface Vibration. Langmuir 2021, 37, 3, 1297-1305. 20210111

[34].Dege Li ，Yi Cao，Hang Dong， Xinlei Wu，Qiang Sun，Chi Ma，Bingfang Huang，Shokoufeh Rastgar，Gunther Wittstock ，Yonghong Liu* ，Yanzhen Zhang*，Pneumatic Conveying Printing Based on Super Hydrophobic Surface. Adv. Mater. Interfaces 2020, 7, 1902131. https://doi.org/10.1002/admi.201902131  20200329

[35].Dege Li， Bingfang Huang， Yi Cao， Molong Han， Xinlei Wu， Qiang Sun， Chi Ma， Lilong Zhao， Peng Liu， Chao Zheng， Hang Dong， Xiaolong Wang， Yonghong Liu， Yanzhen Zhang*. Confined interface vibration for femtoliter droplets generation and manipulation. Nano Select. 2020; 1-8. https://doi.org/10.1002/nano.202000151

[36].Izabella Brand, Isabel Groß, Dege Li, Yanzhen Zhang*, Anja U. Br¨ auer*, Pneumatic conveying printing technique for bioprinting applications. RSC Adv., 2019, 9, 40910.

[37].Y Zhang, B Zhu, Y Liu, G Wittstock. Hydrodynamic dispensing and electrical manipulation of attolitre droplets. Nature Communications 2016, 7, 12424.

[38].Y Zhang, D Li, Y Liu, G Wittstock. Printing with satellite droplets. Small, 2018, 14(27), 1801212.

[39].Y Zhang, D Li, Y Liu, G Wittstock. Inkjet Printing in Liquid Environments. Small 2018, 14(39), 1802583.

[40].Y Zhang, G Wittstock. A Platform for Electric Field Aided and Wire‐Guided Droplet Manipulation. Small 2017, 13 (5), 1601691.

[41].Y Zhang, T P6ähtz, Y Liu, X Wang, R Zhang, Y Shen, R Ji, B Cai. Electric field and humidity trigger contact electrification. Physical Review X. 2015, 5 (1), 011002.

[42].Y Zhang, B Zhu, G Wittstock, D Li, Y Liu, X Zhang. Generating ultra-small droplets based on a double-orifice technique. Sensors and Actuators B: Chemical 2018, 255, 2011-2017.

[43].Y Zhang, Y Liu, Y Shen, Z Li, R Ji, B Cai. A novel method of determining energy distribution and plasma diameter of EDM. International Journal of Heat and Mass Transfer 2014, 75, 425-432.

[44].Y Zhang, Y Liu, Y Shen, R Ji, Z Li, C Zheng. Investigation on the influence of the dielectrics on the material removal characteristics of EDM. Journal of Materials Processing Technology 2014, 214(5), 1052-1061

[45].R Zhang, Y Zhang*, Y Liu, Y Shen, Z Li, X Wang. Energy distribution and material removal of electric arc machining (EAM). Journal of Materials Processing Technology 2017, 242, 110-116

[46].R Ji, Y Liu, C Xu, X Li, B Cai, Y Zhang. Novel method for the hybrid composite electroplating of the upstream pumping mechanical seal. The International Journal of Advanced Manufacturing Technology 2017, 89 (5-8) 1875-1886.

[47].B Zhu, X Zhang, Y Zhang, S Fatikow. Design of diaphragm structure for piezoresistive pressure sensor using topology optimization. Structural and Multidisciplinary Optimization 2017,55 (1), 317-329

[48].Y Shen, Y Liu, W Sun, Y Zhang, H Dong, C Zheng, R Ji. High-speed near dry electrical discharge machining. Journal of Materials Processing Technology 2016, 233, 9-18

[49].Y Shen, Y Liu, Y Zhang, H Dong, P Sun, X Wang, C Zheng, R Ji. Effects of an electrode material on a novel compound machining of inconel718. Materials and Manufacturing Processes 2016, 31 (7), 845-851

[50].X Wang, Y Liu, Y Zhang, etc. Characteristics of plasma channel in powder-mixed EDM based on monopulse discharge. International journal of advanced manufacturing technology 2016, 82 (5-8), 1063-1069

[51].Y Shen, Y Liu, Y Zhang, H Dong, X Wang, C Zheng, G Wang, R Ji. High-throughput electrical discharge milling of WC–8% Co. The International Journal of Advanced Manufacturing Technology 2016, 82 (5-8) 1071-1078

[52].Y Shen, Y Liu, W Sun, H Dong, Y Zhang, X Wang, C Zheng, R Ji. High-speed dry compound machining of Ti6Al4V. Journal of Materials Processing Technology 2015, 224, 200-207

[53].X Wang, Y Liu, Y Zhang. Velocity difference of aqueous drop bouncing between parallel electrodes. Journal of Dispersion Science and Technology 2015, 36 (7), 893-897

[54].Y Shen, Y Liu, Y Zhang, H Dong, W Sun, X Wang, C Zheng, R Ji. High-speed dry electrical discharge machining. International Journal of Machine Tools and Manufacture 2015, 93, 19-25

[55].Y Zhang, Y Liu, X Wang, Z Li, Y Shen. Simulation of Droplet Behavior in Water-in-Oil Emulsion Subjected to an Electric Field. Journal of dispersion science and technology 2015. 36 (2), 259-267.

[56].R Ji, Y Liu, R Diao, Y Zhang, F Wang, B Cai, C Xu. Experimental research on electrical discharge machining characteristics of engineering ceramics with different electrical resistivities. The International Journal of Advanced Manufacturing Technology 2014, 75 (9-12) 1743-1750

[57].R Ji, Y Liu, R Diao, C Xu, X Li, B Cai, Y Zhang. Influence of electrical resistivity and machining parameters on electrical discharge machining performance of engineering ceramics. PloS one 2014, 9 (11), e110775

[58].Y Zhang, Y Liu, Y Shen, Z Li, R Ji, B Cai. A novel method of determining energy distribution and plasma diameter of EDM. International Journal of Heat and Mass Transfer 2014, 75, 425-432

[59].F Wang, Y Liu, Z Tang, R Ji, Y Zhang, Y Shen. Ultra-high-speed combined machining of electrical discharge machining and arc machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2014, 228(5) 663-672

[60].Y Zhang, Y Liu, Y Shen, R Ji, Z Li, C Zheng. Investigation on the influence of the dielectrics on the material removal characteristics of EDM. Journal of Materials Processing Technology 2014, 214(5), 1052-1061

[61].F Wang, Y Liu, Y Zhang, Z Tang, R Ji, C Zheng. Compound machining of titanium alloy by super high speed EDM milling and arc machining. Journal of Materials Processing Technology 2014, 214 (3), 531-538.

[62].Y Shen, Y Liu, Y Zhang, B Tan, R Ji, B Cai, C Zheng. Determining the energy distribution during electric discharge machining of Ti–6Al–4V. The International Journal of Advanced Manufacturing Technology 2014, 70 (1-4), 11-17.

学术专著

[1] Yonghong Liu, Yanzhen Zhang, Renjie Ji, Baoping Cai, Yang Shen,   Xiaolong Wang, Green Efficiency Sinking Electric Discharge Machining in   Water-in-oil Working Fluids. Beijing: Science Press, 2016

[2] Yonghong Liu, Renjie Ji, Baoping Cai, Yanzheng Zhang, Xiaopeng Li, Electric Discharge Machining of   Insulating and Weakly Conductive Engineering Ceramics, Beijing: Science   Press, 2015

[3] Yonghong Liu, Baoping Cai, Renjie Ji, Zengkai Liu, Yanzheng Zhang, Reliability modeling   and evaluation of subsea blowout preventer system, Beijing: Science Press,   2015

中国发明专利

[1] 张彦振;赵小迪;胡国放;李子豪;贺炜威;吴玉尧;闫明宇;王继德;王宁;左连磊;邦蒙良;刘永红;纪仁杰;蔡宝平; 一种利用水锤效应的高熔点金属熔滴按需喷射装置及方法,CN116786838A

[2] 张彦振;李子豪;王继德;胡国放;李德格;贺威炜;吴玉尧;王宁;左连磊;邦蒙良;郑超;艾白布•阿不力米提;刘永红;纪仁杰;蔡宝平;刘增凯;王晓龙; 一种基于受约束表面振荡的阵列化无串扰电流体动力喷墨打印装置及方法;CN116811430A

[3] 张彦振;闫明宇;朱建豪;胡国放;李子豪;李德格;贺炜威;吴玉尧;刘永红; 一种双脉冲激光驱动的液态金属无喷孔喷射方法; CN116833423A

[4] 张彦振;李子豪;王继德;胡国放;李德格;刘增凯;刘永红;纪仁杰;蔡宝平;一种基于受约束表面振荡的超高频电流体动力喷射系统、方法以及一种夹具;CN116100956A

[5] 张彦振;刘永红;李德格;一种基于对自组装分子膜控制技术的金属微3D打印方法;CN108930054B

[6] 张彦振;李德格;刘永红;一种基于气流传送的生物打印新方法; CN109203451B

[7] 刘永红;张彦振;王晓龙;申泱;纪仁杰;蔡宝平;基于液滴泰勒锥的微纳电化学沉积加工方法;CN105420763B

[8] 张彦振;刘永红;朱本亮;一种微纳米液滴制备方法; CN105498869B

[9] 刘永红;董行;李振;申泱;张彦振; 电火花成型加工用冲液孔部位工件的同步加工机构; CN104325202B

[10] 刘永红;王晓龙;张彦振;孙强;李振;申泱; 绿色高效油包水型电火花成形加工工作液; CN104191052B

获奖荣誉

[1] 德国“洪堡学者”

[2] 澳大利亚“发现早期职业研究员”

[3] 山东省“泰山学者”青年专家

[4] 山东省“优青“（海外）

[5] 中国石油大学（华东）"光华学者"

学术兼职

[1] Processes期刊客座编辑

[2] 中国机械工程学会特种加工分会理事

[3] 中国机械工程学会高级会员

[4] 美国物理协会会员

[5] 澳大利亚自然科学开云体育官网入口下评审员

[6] Small、ACS Applied Materials & Interfaces、International Journal of Heat and Mass Transfer等国内外多个杂志的审稿专家。